High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is really a challenging problem for owners. From the desired temperature to their favorite light level, guests will probably return for another stay when they can customize their room to suit their preferences. However, providing these functions using old technology wastes plenty of energy. As an example, there are a lot of issues with the old card key switches. Guests can put any card within the old switches, or they may ask for more than one card. Even though hotel desk refuses to give more than one card to a guest, she/he may claim to have lost the card.
The standard old technology of hotel card switch. Additionally there is a large amount of over consumption of lights and AC energy because of things running even if guests aren’t inside their rooms, which could cause a financial loss for your owner. Obviously, no hotel owner would like to prohibit guests from using a comfortable stay, nor do owners expect guests to get in a dark or cold hotel room. No one is to blame. Both guests and hotel owners have the authority to fulfill their interests.
Some hotel owners think when they separate the AC through the main network, less energy will be consumed, while others feel that motion sensors are the solution. However, these approaches forget to resolve the issue. The AC is the most energy-consuming device of, and motion sensors could be nightmares because they only function based upon movement detection, meaning that the AC and lights might go off while a guest is sleeping or reading a book. Nightmarish!
The TIS Automation Company provides the best solution for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with being able to detect human presence in a room. This ceiling-mounted sensor has many options, including a PIR motion sensor, a mild harvest sensor, 2X digital inputs, infrared emitters compatible with all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the brand new method for hotel economical technology. By installing this door sensor on the entrance to a room, connecting it to the Energy Servant’s digital input, and programming the logic lines, the situation of room occupancy is completely resolved.
These logics can be defined with this sensor to control room energy with no discomfort for guests:
Logic 1: If there is any movement in the room, the occupancy mode will be on.
Logic 2: In the event the main door is opened and closed, a flag will activate for just one minute to ascertain if there is certainly movement in room. If no movement is detected after 1 minute, the system will activate energy-saving mode. This really is useful in situations each time a guest enters the space briefly. In energy-saving mode all lights are off except for a nightlight, which stays on for three hours in the event there is certainly another guest taking a nap. Also, the AC will never be turned off, but its temperature is going to be decreased by 2 degrees. It will help save energy with time.
Logic 3: In the event the energy-saving mode is enabled and no movement is detected for over 3-5 hours, the nightlight and AC will be turned off automatically. Additionally it is possible to define lower temperature levels for that AC. Furthermore, the Energy Servant can change the AC on/off when it recognizes that a balcony window/door is open. All this requires is adding a magnetic contact connected to the balcony window/door and programming the required smart decision. The light harvest sensor helps save energy by wscgid balcony lights off if you have enough sunlight.
Another practical and beneficial capacity for this sensor is its built in thermostat, which will help maintain the right temperature all the time. This is very important to keep furniture fresh and intact. Also, in hot spots and whether or not the room is empty for some time, humidity and bad smells will not turn into a problem within the room. This sensor may be designed to alter AC to dry mode in the event the room temperature reaches or exceeds 28-30C degree. This can happen repeatedly throughout the day if required. An identical performance can be programmed in cold spots to stop mold.
Another option of the smart system is TV control. If the hotel provides the guest having a room tablet, she/he has the capacity to control the room’s TV along with it. This sensor was set up in 20 rooms inside the Fairmount Blue Mountain Hotel in Sydney. The end result was considerably enhanced energy management and lots of satisfactory comments from guests who enjoyed their luxurious stay at this hotel.
TIS offers the chance to meet both hotel owners and guests interests and requires with just a few items and then in the most energy efficient way possible. To learn more or to plan a consultation, call us at www.tiscontrol.com